Still searching?learn more

Robinson R-22 Bubble, Rotor Mast, Tail Rotor & Tail Fin Covers

Robinson R-22 Bubble, Rotor Mast, Tail Rotor & Tail Fin Covers

Product Images:

photo credit: Photo provided by customer

 

photo credit: Photo provided by customer

 

photo credit: Roger Cain Photography

 

photo credit: Bruce's Custom Covers, Aircraft Covers, Inc.

 

photo credit: Photo provided by customer

 

photo credit: Photo provided by customer

 

photo credit: Photo provided by customer

 

photo credit: Bruce's Custom Covers, Aircraft Covers, Inc.

 

photo credit: Roger Cain Photography

 

photo credit: Bruce's Custom Covers, Aircraft Covers, Inc.

 

photo credit: Photo provided by customer

 

photo credit: Photo provided by customer

 

photo credit: Photo provided by customer

 

photo credit: Photo provided by customer

 

photo credit: Bruce's Custom Covers, Aircraft Covers, Inc.

 

photo credit: Bruce's Custom Covers, Aircraft Covers, Inc.

 

photo credit: Photo provided by customer

 

CLICK on any small image to enlarge, or
CLICK on arrows to view next image

Product ID

Product name

Unit Price

close= Bruce's Comments, Photos, Info & More.
= Product Photos, Etc.
= Items that have expedited delivery.

Quantity Qty

Cart

Products:
Try Our New Product Filter
×

Only want to see some of our products?

Use the Product Filter Checkbox List to only see the products that interest you.

Section 1: Cockpit/Bubble Covers

4 Products, 19 Photos

R22-000

BUBBLE COVER (STANDARD MODEL)

$ 755.00

Product Options & Information..............................................................................................................

  • High resolution photos of your aircraft would be helpful. We may contact you about that.
  • The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional $35 (both sides).
  • We are aware of some variation in this item. We may contact you about that.

Product Description................................................................................................................................

The Robinson R-22 Bubble Cover helps reduce damage to the upholstery and avionics caused by excessive heat and can eliminate problems caused by leaking door and window seals. They keep the windshield and window surfaces clean and help prevent vandalism and theft.... read more

The Bubble Cover encloses the entire canopy including the windshield, skylights, and chin bubble Attachment buckles are made of nonmetal Delrin, designed for rugged outdoor use. Both the top and bottom hems of the cover have a special rope-hem feature with which they can be tightened to help prevent abrasive chafing of the windshield. Pockets are sewn into the cover for the temperature probe and pitot tubes. The bubble cover is reinforced with patches at hinge points, door handles, and for the windshield wipers. For ease of installation, the bubble cover is color-coded (red=left, green=right) with color swatches sewn into the corners.... read more

This cover type is made from Silver Acrylic Sunbrella canvas and is 100% lined with a soft and smooth microfiber. Bruce's Custom Covers developed this material combination especially for aircraft protection. The outer material is medium weight and treated for water resistance, UV resistance and anti-static buildup. The inner lining is a very soft and smooth microfiber to prevent scratching. The material is very reflective, and tests show that the cabin interior temperature can be reduced to near-ambient temperature on the hottest of days. It is water, ice and snow repellent, yet breathable to allow moisture to escape from between the cover and the aircraft surface.... read more

R22-010

BUBBLE COVER (BUBBLE WINDOWS)

$ 755.00

Product Options & Information..............................................................................................................

  • High resolution photos of your aircraft would be helpful. We may contact you about that.
  • The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional $35 (both sides).
  • We are aware of some variation in this item. We may contact you about that.

Product Description................................................................................................................................

The Robinson R-22 Bubble Cover helps reduce damage to the upholstery and avionics caused by excessive heat and can eliminate problems caused by leaking door and window seals. They keep the windshield and window surfaces clean and help prevent vandalism and theft.... read more

The Bubble Cover encloses the entire canopy including the windshield, skylights, and chin bubble Attachment buckles are made of nonmetal Delrin, designed for rugged outdoor use. Both the top and bottom hems of the cover have a special rope-hem feature with which they can be tightened to help prevent abrasive chafing of the windshield. Pockets are sewn into the cover for the temperature probe and pitot tubes. The bubble cover is reinforced with patches at hinge points, door handles, and for the windshield wipers. For ease of installation, the bubble cover is color-coded (red=left, green=right) with color swatches sewn into the corners.... read more

This cover type is made from Silver Acrylic Sunbrella canvas and is 100% lined with a soft and smooth microfiber. Bruce's Custom Covers developed this material combination especially for aircraft protection. The outer material is medium weight and treated for water resistance, UV resistance and anti-static buildup. The inner lining is a very soft and smooth microfiber to prevent scratching. The material is very reflective, and tests show that the cabin interior temperature can be reduced to near-ambient temperature on the hottest of days. It is water, ice and snow repellent, yet breathable to allow moisture to escape from between the cover and the aircraft surface.... read more

R22-019

BUBBLE COVER (EXT. PAST ROTOR HUB)

$ 925.00

Product Options & Information..............................................................................................................

  • High resolution photos of your aircraft would be helpful. We may contact you about that.
  • The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional $35 (both sides).
  • We are aware of some variation in this item. We may contact you about that.

Product Description................................................................................................................................

The Robinson R-22 Bubble Cover helps reduce damage to the upholstery and avionics caused by excessive heat and can eliminate problems caused by leaking door and window seals. They keep the windshield and window surfaces clean and help prevent vandalism and theft.... read more

The Bubble Cover encloses the entire canopy including the windshield, skylights, and chin bubble Attachment buckles are made of nonmetal Delrin, designed for rugged outdoor use. Both the top and bottom hems of the cover have a special rope-hem feature with which they can be tightened to help prevent abrasive chafing of the windshield. Pockets are sewn into the cover for the temperature probe and pitot tubes. The bubble cover is reinforced with patches at hinge points, door handles, and for the windshield wipers. For ease of installation, the bubble cover is color-coded (red=left, green=right) with color swatches sewn into the corners.... read more

This cover type is made from Silver Acrylic Sunbrella canvas and is 100% lined with a soft and smooth microfiber. Bruce's Custom Covers developed this material combination especially for aircraft protection. The outer material is medium weight and treated for water resistance, UV resistance and anti-static buildup. The inner lining is a very soft and smooth microfiber to prevent scratching. The material is very reflective, and tests show that the cabin interior temperature can be reduced to near-ambient temperature on the hottest of days. It is water, ice and snow repellent, yet breathable to allow moisture to escape from between the cover and the aircraft surface.... read more

R22-020

BUBBLE COVER (BUBBLE WINDOWS & EXT. PAST ROTOR HUB)

$ 945.00

Product Options & Information..............................................................................................................

  • High resolution photos of your aircraft would be helpful. We may contact you about that.
  • The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional $35 (both sides).
  • We are aware of some variation in this item. We may contact you about that.

Product Description................................................................................................................................

The Robinson R-22 Bubble Cover helps reduce damage to the upholstery and avionics caused by excessive heat and can eliminate problems caused by leaking door and window seals. They keep the windshield and window surfaces clean and help prevent vandalism and theft.... read more

The Bubble Cover encloses the entire canopy including the windshield, skylights, and chin bubble Attachment buckles are made of nonmetal Delrin, designed for rugged outdoor use. Both the top and bottom hems of the cover have a special rope-hem feature with which they can be tightened to help prevent abrasive chafing of the windshield. Pockets are sewn into the cover for the temperature probe and pitot tubes. The bubble cover is reinforced with patches at hinge points, door handles, and for the windshield wipers. For ease of installation, the bubble cover is color-coded (red=left, green=right) with color swatches sewn into the corners.... read more

This cover type is made from Silver Acrylic Sunbrella canvas and is 100% lined with a soft and smooth microfiber. Bruce's Custom Covers developed this material combination especially for aircraft protection. The outer material is medium weight and treated for water resistance, UV resistance and anti-static buildup. The inner lining is a very soft and smooth microfiber to prevent scratching. The material is very reflective, and tests show that the cabin interior temperature can be reduced to near-ambient temperature on the hottest of days. It is water, ice and snow repellent, yet breathable to allow moisture to escape from between the cover and the aircraft surface.... read more

Section 2: Engine/Tail Rotor Covers

18 Products, 47 Photos

R22-100

ENGINE COVER

$ 595.00

Product Options & Information..............................................................................................................

  • The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional $25 (both sides).

Product Description................................................................................................................................

Engine Cover details vary by model, but generally these covers are designed to enclose and protect the swash plate, inlet, exhaust and engine access areas. They are designed to tighten up around the main rotor drive shaft and tailboom bottleneck areas, and attach securely with straps either under the belly or to the land gear cross tubes (or both). Delrin buckles are used to tighten the attachment straps. The engine cover is made of Solution-Dyed Polyester or acrylic Sunbrella, and is available in a variety of colors (contact us for details. Specific information for each model is available on request.... read more

R22-101

ENGINE COVER (100% lined with microfiber)

$ 690.00

Product Options & Information..............................................................................................................

  • The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional $25 (both sides).

Product Description................................................................................................................................

Engine Cover details vary by model, but generally these covers are designed to enclose and protect the swash plate, inlet, exhaust and engine access areas. They are designed to tighten up around the main rotor drive shaft and tailboom bottleneck areas, and attach securely with straps either under the belly or to the land gear cross tubes (or both). Delrin buckles are used to tighten the attachment straps. The engine cover is made of Solution-Dyed Polyester or acrylic Sunbrella, and is available in a variety of colors (contact us for details. Specific information for each model is available on request.... read more

R22-102

ENGINE COVER, 100% lined with microfiber w/hail protection

$ 1320.00

Product Options & Information..............................................................................................................

  • The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional $25 (both sides).

Product Description................................................................................................................................

Engine Cover details vary by model, but generally these covers are designed to enclose and protect the swash plate, inlet, exhaust and engine access areas. They are designed to tighten up around the main rotor drive shaft and tailboom bottleneck areas, and attach securely with straps either under the belly or to the land gear cross tubes (or both). Delrin buckles are used to tighten the attachment straps. The engine cover is made of Solution-Dyed Polyester or acrylic Sunbrella, and is available in a variety of colors (contact us for details. Specific information for each model is available on request.... read more

Additional Information................................................................................................................................

HAIL PROTECTION COVERS: GENERAL DESCRIPTION

Hail Protection Covers are designed to effectively protect against small to moderate sized hailstones, yet still be practical enough to be somewhat portable and installable by 1-2 people. Upper surfaces are protected by 1/4" closed cell foam, sandwiched between fabric layers. .... read more

NOTE: This design is unlikely to protect against the largest hailstones, which can be larger than 1 inch in diameter.

R22-105

ENGINE COVER, also covers bottom

$ 740.00

Product Options & Information..............................................................................................................

  • The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional $25 (both sides).

Product Description................................................................................................................................

Engine Cover details vary by model, but generally these covers are designed to enclose and protect the swash plate, inlet, exhaust and engine access areas. They are designed to tighten up around the main rotor drive shaft and tailboom bottleneck areas, and attach securely with straps either under the belly or to the land gear cross tubes (or both). Delrin buckles are used to tighten the attachment straps. The engine cover is made of Solution-Dyed Polyester or acrylic Sunbrella, and is available in a variety of colors (contact us for details. Specific information for each model is available on request.... read more

R22-110

INSULATED ENGINE COVER

$ 875.00

Product Options & Information..............................................................................................................

  • This item is available in Red, Black or Silver. Standard is Red, but contact us if you want another color.
  • High resolution photos of your aircraft would be helpful. We may contact you about that.
  • The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional $25 (both sides).

Product Description................................................................................................................................

The Robinson R-22 Insulated Engine Cover works well in cold climates to help with engine preheating. You can add an access flap for an additional fee. It will cinch around or behind the spinner, cover the entire engine cowl area including the engine air inlets, and fastens together with Velcro beneath the spinner down the front of the cowling.... read more

Insulated Covers Material - A special composite material of solution-dyed polyester, 3M Thinsulate insulation, and soft nylon interior fabric. Our insulated covers are designed to complement an engine preheater and help retain heat in the engine compartment after shutdown. If you operate your aircraft in cold-weather, these covers will help prevent engine wear and tear.... read more

R22-111

INSULATED ENGINE COVER, also covers bottom

$ 1025.00

Product Options & Information..............................................................................................................

  • This item is available in Red, Black or Silver. Standard is Red, but contact us if you want another color.
  • High resolution photos of your aircraft would be helpful. We may contact you about that.
  • The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional $25 (both sides).

Product Description................................................................................................................................

The Robinson R-22 Insulated Engine Cover works well in cold climates to help with engine preheating. You can add an access flap for an additional fee. It will cinch around or behind the spinner, cover the entire engine cowl area including the engine air inlets, and fastens together with Velcro beneath the spinner down the front of the cowling.... read more

Insulated Covers Material - A special composite material of solution-dyed polyester, 3M Thinsulate insulation, and soft nylon interior fabric. Our insulated covers are designed to complement an engine preheater and help retain heat in the engine compartment after shutdown. If you operate your aircraft in cold-weather, these covers will help prevent engine wear and tear.... read more

R22-300

ROTOR HUB COVER

$ 315.00

Product Options & Information..............................................................................................................

  • The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional $25 (both sides).

Product Description................................................................................................................................

Rotor Hub Covers overlaps with the Blade Covers to ensure complete protection for the entire main rotor system. Designed like a jacket with sleeves and no collar, the rotor hub cover fastens together below each blade with Delrin buckles. The Rotor Hub Cover is normally made from Solution-Dyed Polyester.... read more

R22-301

ROTOR HUB COVER, 100% lined with microfiber w/hail protection

$ 730.00

Product Options & Information..............................................................................................................

  • The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional $25 (both sides).

Product Description................................................................................................................................

Rotor Hub Covers overlaps with the Blade Covers to ensure complete protection for the entire main rotor system. Designed like a jacket with sleeves and no collar, the rotor hub cover fastens together below each blade with Delrin buckles. The Rotor Hub Cover is normally made from Solution-Dyed Polyester.... read more

Additional Information................................................................................................................................

HAIL PROTECTION COVERS: GENERAL DESCRIPTION

Hail Protection Covers are designed to effectively protect against small to moderate sized hailstones, yet still be practical enough to be somewhat portable and installable by 1-2 people. Upper surfaces are protected by 1/4" closed cell foam, sandwiched between fabric layers. .... read more

NOTE: This design is unlikely to protect against the largest hailstones, which can be larger than 1 inch in diameter.

R22-302

INSULATED ROTOR HUB COVER

$ 470.00

Product Options & Information..............................................................................................................

  • This item is available in Red, Black or Silver. Standard is Red, but contact us if you want another color.
  • The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional $25 (both sides).

Product Description................................................................................................................................

Rotor Hub Covers overlaps with the Blade Covers to ensure complete protection for the entire main rotor system. Designed like a jacket with sleeves and no collar, the rotor hub cover fastens together below each blade with Delrin buckles. The Rotor Hub Cover is normally made from Solution-Dyed Polyester.... read more

R22-400

BLADE COVERS (set of 2)

$ 470.00

Product Options & Information..............................................................................................................

  • The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional $25 (both sides).

Product Description................................................................................................................................

Bruce’s Robinson R-22 Blade Covers are made of medium-weight Solution-Dyed Polyester and designed to avoid trim tabs or wicks. You can install Blade Covers from the ground with the aid of a lightweight rope attached to the open end. Covers are cinched tight at the blade root with straps and quick-release plastic buckles. The Cold Weather Blade Covers are fitted with full-length zippers and optional deice “boots” designed to accept a preheater hose; a small opening at the tip of the cover allows for some air circulation and drainage in freezing weather. Some part numbers have features for an extra charge.... read more

R22-401

BLADE COVERS, w/ tie downs (set of 2)

$ 495.00

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

Product Options & Information..............................................................................................................

  • The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional $25 (both sides).

Product Description................................................................................................................................

Bruce’s Robinson R-22 Blade Covers are made of medium-weight Solution-Dyed Polyester and designed to avoid trim tabs or wicks. You can install Blade Covers from the ground with the aid of a lightweight rope attached to the open end. Covers are cinched tight at the blade root with straps and quick-release plastic buckles. The Cold Weather Blade Covers are fitted with full-length zippers and optional deice “boots” designed to accept a preheater hose; a small opening at the tip of the cover allows for some air circulation and drainage in freezing weather. Some part numbers have features for an extra charge.... read more

R22-402

BLADE COVERS, w/hail protection, w/ tie downs (set of 2)

$ 1060.00

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

Product Options & Information..............................................................................................................

  • The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional $25 (both sides).

Product Description................................................................................................................................

Bruce’s Robinson R-22 Blade Covers are made of medium-weight Solution-Dyed Polyester and designed to avoid trim tabs or wicks. You can install Blade Covers from the ground with the aid of a lightweight rope attached to the open end. Covers are cinched tight at the blade root with straps and quick-release plastic buckles. The Cold Weather Blade Covers are fitted with full-length zippers and optional deice “boots” designed to accept a preheater hose; a small opening at the tip of the cover allows for some air circulation and drainage in freezing weather. Some part numbers have features for an extra charge.... read more

Additional Information................................................................................................................................

HAIL PROTECTION COVERS: GENERAL DESCRIPTION

Hail Protection Covers are designed to effectively protect against small to moderate sized hailstones, yet still be practical enough to be somewhat portable and installable by 1-2 people. Upper surfaces are protected by 1/4" closed cell foam, sandwiched between fabric layers. .... read more

NOTE: This design is unlikely to protect against the largest hailstones, which can be larger than 1 inch in diameter.

R22-410

BLADE COVERS (COLD WEATHER TYPE) (set of 2)

$ 755.00

Product Options & Information..............................................................................................................

  • The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional $25 (both sides).

Product Description................................................................................................................................

Bruce’s Robinson R-22 Blade Covers are made of medium-weight Solution-Dyed Polyester and designed to avoid trim tabs or wicks. You can install Blade Covers from the ground with the aid of a lightweight rope attached to the open end. Covers are cinched tight at the blade root with straps and quick-release plastic buckles. The Cold Weather Blade Covers are fitted with full-length zippers and optional deice “boots” designed to accept a preheater hose; a small opening at the tip of the cover allows for some air circulation and drainage in freezing weather. Some part numbers have features for an extra charge.... read more

R22-411

BLADE COVERS (COLD WEATHER TYPE), w/ hail protection (set of 2)

$ 1445.00

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

Product Options & Information..............................................................................................................

  • The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional $25 (both sides).

Product Description................................................................................................................................

Bruce’s Robinson R-22 Blade Covers are made of medium-weight Solution-Dyed Polyester and designed to avoid trim tabs or wicks. You can install Blade Covers from the ground with the aid of a lightweight rope attached to the open end. Covers are cinched tight at the blade root with straps and quick-release plastic buckles. The Cold Weather Blade Covers are fitted with full-length zippers and optional deice “boots” designed to accept a preheater hose; a small opening at the tip of the cover allows for some air circulation and drainage in freezing weather. Some part numbers have features for an extra charge.... read more

Additional Information................................................................................................................................

HAIL PROTECTION COVERS: GENERAL DESCRIPTION

Hail Protection Covers are designed to effectively protect against small to moderate sized hailstones, yet still be practical enough to be somewhat portable and installable by 1-2 people. Upper surfaces are protected by 1/4" closed cell foam, sandwiched between fabric layers. .... read more

NOTE: This design is unlikely to protect against the largest hailstones, which can be larger than 1 inch in diameter.

R22-412

BLADE COVERS (COLD WEATHER TYPE), w/ hail protection w/ tie-downs (set of 2)

$ 1720.00

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

Product Options & Information..............................................................................................................

  • The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional $25 (both sides).

Product Description................................................................................................................................

Bruce’s Robinson R-22 Blade Covers are made of medium-weight Solution-Dyed Polyester and designed to avoid trim tabs or wicks. You can install Blade Covers from the ground with the aid of a lightweight rope attached to the open end. Covers are cinched tight at the blade root with straps and quick-release plastic buckles. The Cold Weather Blade Covers are fitted with full-length zippers and optional deice “boots” designed to accept a preheater hose; a small opening at the tip of the cover allows for some air circulation and drainage in freezing weather. Some part numbers have features for an extra charge.... read more

Additional Information................................................................................................................................

HAIL PROTECTION COVERS: GENERAL DESCRIPTION

Hail Protection Covers are designed to effectively protect against small to moderate sized hailstones, yet still be practical enough to be somewhat portable and installable by 1-2 people. Upper surfaces are protected by 1/4" closed cell foam, sandwiched between fabric layers. .... read more

NOTE: This design is unlikely to protect against the largest hailstones, which can be larger than 1 inch in diameter.

R22-500

BLADE TIE-DOWNS (fabric type) (set of 2)

$ 220.00

Product Options & Information..............................................................................................................

  • The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional $25 (both sides).

Product Description................................................................................................................................

Blade Tie-Downs are "socks" which fit over the blade tip with or without Blade Covers installed. Front blade tie-downs have two lengths of rope or strap which attaches to the front cross tubes on either side of the cabin. The other tie-downs have generous lengths of rope or strap to tie the blades down at any convenient spot.... read more

R22-600

TAIL ROTOR/GEARBOX COVER

$ 220.00

Product Options & Information..............................................................................................................

  • The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional $25 (both sides).

Product Description................................................................................................................................

The Robinson R-22 Tail Rotor Cover is a one-piece design which encloses both the blades and their hub, snapping closed along the bottom edge. The tail rotor cover is normally made from Solution-Dyed Polyester.... read more

ALL-YEAR USE MATERIAL - Made with Silver Acrylic Sunbrella canvas, the all-year use material is the best option for sun protection and cover longevity. This heavier more durable material is intended for all weather conditions, such as rain and snow or lots of sun.... read more

WINTER USE MATERIAL - Made with Solution-Dyed Polyester fabric, this option is intended for seasonal use to aid in deicing, rain mitigation, or for occasional travel. The material is lighter and more compact, but more susceptible to UV damage and may have a shorter useful life if used continuously outside than the all-year use material.... read more

R22-601

TAIL ROTOR/GEARBOX COVER w/hail protection

$ 425.00

Product Options & Information..............................................................................................................

  • The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional $25 (both sides).

Product Description................................................................................................................................

The Robinson R-22 Tail Rotor Cover is a one-piece design which encloses both the blades and their hub, snapping closed along the bottom edge. The tail rotor cover is normally made from Solution-Dyed Polyester.... read more

ALL-YEAR USE MATERIAL - Made with Silver Acrylic Sunbrella canvas, the all-year use material is the best option for sun protection and cover longevity. This heavier more durable material is intended for all weather conditions, such as rain and snow or lots of sun.... read more

WINTER USE MATERIAL - Made with Solution-Dyed Polyester fabric, this option is intended for seasonal use to aid in deicing, rain mitigation, or for occasional travel. The material is lighter and more compact, but more susceptible to UV damage and may have a shorter useful life if used continuously outside than the all-year use material.... read more

Additional Information................................................................................................................................

HAIL PROTECTION COVERS: GENERAL DESCRIPTION

Hail Protection Covers are designed to effectively protect against small to moderate sized hailstones, yet still be practical enough to be somewhat portable and installable by 1-2 people. Upper surfaces are protected by 1/4" closed cell foam, sandwiched between fabric layers. .... read more

NOTE: This design is unlikely to protect against the largest hailstones, which can be larger than 1 inch in diameter.

Section 4: Tailboom Covers

4 Products, 10 Photos

R22-610

TAILBOOM COVER

$ 510.00

Product Options & Information..............................................................................................................

  • The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional $25 (both sides).

Product Description................................................................................................................................

The Tailboom Cover details vary by model, but generally the helicopter tail boom cover encloses the tail boom from the "bottleneck" to the aft end. They usually also cover the horizontal stabilizers, and are custom made to allow for antennae, lights, and other protrusions. They attach with straps underneath the tail boom. Covers for the vertical and horizontal stabilizers are also available separately. Specific information for each model is available on request.... read more

R22-611

TAILBOOM COVER w/hail protection

$ 1010.00

Product Options & Information..............................................................................................................

  • The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional $25 (both sides).

Product Description................................................................................................................................

The Tailboom Cover details vary by model, but generally the helicopter tail boom cover encloses the tail boom from the "bottleneck" to the aft end. They usually also cover the horizontal stabilizers, and are custom made to allow for antennae, lights, and other protrusions. They attach with straps underneath the tail boom. Covers for the vertical and horizontal stabilizers are also available separately. Specific information for each model is available on request.... read more

Additional Information................................................................................................................................

HAIL PROTECTION COVERS: GENERAL DESCRIPTION

Hail Protection Covers are designed to effectively protect against small to moderate sized hailstones, yet still be practical enough to be somewhat portable and installable by 1-2 people. Upper surfaces are protected by 1/4" closed cell foam, sandwiched between fabric layers. .... read more

NOTE: This design is unlikely to protect against the largest hailstones, which can be larger than 1 inch in diameter.

R22-620

TAIL FIN COVERS (set of 3)

$ 240.00

R22-621

TAIL FIN COVERS w/hail protection (set of 3)

$ 460.00

Additional Information................................................................................................................................

HAIL PROTECTION COVERS: GENERAL DESCRIPTION

Hail Protection Covers are designed to effectively protect against small to moderate sized hailstones, yet still be practical enough to be somewhat portable and installable by 1-2 people. Upper surfaces are protected by 1/4" closed cell foam, sandwiched between fabric layers. .... read more

NOTE: This design is unlikely to protect against the largest hailstones, which can be larger than 1 inch in diameter.

Section 6: Miscellaneous Products

2 Products, 0 Photos

R22-650

PROTECTIVE BAG FOR REMOVABLE DOORS (holds both doors)

$ 420.00

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

Product Description................................................................................................................................

**Padded Door Bags* are designed to provide portable protection of the doors when they are removed from the aircraft. They are padded to moderate thickness, zippered closed, and have sturdy carry handles for easy transport.... read more

R22-655

PROTECTIVE BAGS FOR REMOVABLE DOORS (1 cover per door) (set of 2)

$ 755.00

Sorry, no photos at this time.

Check out the photo gallery or contact Bruce about this product.

Email Bruce

Product Description................................................................................................................................

**Padded Door Bags* are designed to provide portable protection of the doors when they are removed from the aircraft. They are padded to moderate thickness, zippered closed, and have sturdy carry handles for easy transport.... read more

Section 7: Light Weight Products: Travel Covers and FlyAway Covers

1 Product, 2 Photos

R22-805

TRAVEL COVER, Light Weight Travel Bubble Cover

$ 690.00

Product Options & Information..............................................................................................................

  • The aircraft registration mark (in the U.S.: the N-Number) can be imprinted on this product for an additional $25 (both sides).

Product Description................................................................................................................................

The Robinson R-22 Lightweight Travel Bubble Cover is the same design as our standard bubble cover, but the material used is very lightwieight and will fold up and store in a smaller space.... read more

Travel Covers are made with Silver Solution-Dyed Polyester fabric and fully lined over the entire cover. The material is lightweight and more compact for easy stowage in the aircraft. The polyester material is water resistant, but only intended for occasional use outside. We also have an ultra lightweight material available for fitted hangar dust covers. For daily outdoor use, the non-travel Sunbrella Cover is the best choice.... read more

Can't find what you're looking for? We probably make it!
Call us at (408)738-3959 or toll-free at (800)777-6405 (U.S. & Canada) Or use our online contact form here.